Austin Talbot
Idaho Falls

Experienced Sr. Systems Engineer with a demonstrated history of working in the oil & energy industry. Skilled in Process Control, Software Development, Circuit Board Layout, and Root Cause Analysis. Strong engineering professional with a Bachelor of Engineering (B.E.) focused in Electrical and Electronics Engineering from Utah State University.
Curtiss-Wright Corporation
2018-04-01 - 2018-11-06
Sr. Systems Engineer
I Integrate real time monitoring systems for the nuclear industry. This includes, configuring complicated redundant servers, network switches, and Domain controllers. We utilize an nuclear rated data acquisition system (DAS). These systems are used by the nuclear reactor operators to gain better efficiencies out of the plant, and to ensure that safety functions that are used by the nuclear standards are met. I built an automated test fixture that reduced the testing time of these very complex systems, while also increasing the number of tests and quality of the tests.
    Baker Hughes, a GE company
    2016-10-01 - 2018-04-01
    Lead System Test and Validation Engineer
    Work closely In an agile/scrum environment with the Systems Engineering, Electrical, Firmware and, the Software teams to ensure all of the products meet all of the requirements. Create update and maintain a device agnostic automated test architecture to reduce time to test new designs, increase reliability to and, reduce overall system maintenance cost.
      GE Oil & Gas
      2014-07-01 - 2016-10-01
      Edison Engineering Development
      Third Rotation - Jacksonville, FL GE Flow and Process Technologies- Lead the migration effort of the software from the flow lab in Avon MA to Jacksonville Fl.- Established cohesive development environment and standardizing development code base.- Trained others on software repository use and source code control methods.- Documented and created source control for the software that is used in the flow labs - Brought flow lab online at Jacksonville with little to no transition time.- Worked with EHS to improve safety in the flow lab.
        GE Oil & Gas
        2014-07-01 - 2016-10-01
        Edison Engineering Development
        Second Rotation - Lewiston, PA GE Inspection Technologies- Characterized the analog performance of the front end receiver channels on Mentor UT.- Identified the source of the noise and crosstalk problems faced on the Mentor UT.- Validated automated test equipment was producing the same result as the manual testing.- Trained and supported the remote teams on Ultrasound.- Worked with Ultrasound expert to ensure that the Mentor UT was meeting specification standards.- Architect of a systems engineering plan for a high performance 4 channel weld inspection Ultrasound instrument.
          GE Oil & Gas
          2014-07-01 - 2016-10-01
          Edison Engineering Development
          First Rotation - Minden, NV GE DST- Performed Electromagnetic interference and Electromagnetic compatibility testing and certification.- Re-designed the AC Linear Variable differential Transformer input output module for 3500 Refresh effort.- Standardized safety label creation process to ensure compliance.- Implemented a process to include a safety section in all of the product manuals.- Documented the mechanics of the AC Linear Variable differential Transformer.
            GE Healthcare
            2008-11-01 - 2014-07-01
            Metrologist /Engineering technician
            - Manufacturing process improvement in the areas of Liquid media, Dry Powder media, and Serum.- Programmable Logic Controller, Variable Frequency Drive, and other controls troubleshooting- Clean room Certification- Calibration of critical process equipment in accordance with NIST- Statistical process control Lead the production of 5 production lines. Ensure that the goals were being met and the people on the production lines were trained properly.
              Udacity
              Full Stack Web Developer - Nanodegree
              2018-07-01 - 2018-11-06
              Utah State University
              Electrical and Electronics Engineering - College
              2009-01-01 - 2014-05-01
              English
              Native
              Spanish
              Fluent
              Python
                C#
                  Engineering